# nichrome wire resistance vs temperature

This experiment focuses on the resistance of wires made of materials such as copper and nichrome, or more specifically, the resistivity of copper and nichrome as functions of temperature. Referring here. Nichrome alloys consist of nickel, chromium, iron, and sometimes other elements. Nichrome is characterized by its high resistivity and good oxidation resistance. Nichrome V: Alloy: 0.00013: Manganin: Alloy +/- 0.000015: Constantan: Alloy-0.000074 * = Steel alloy at 99.5 percent iron, 0.5 percent carbon tys. E = IR E = 0.5 * 0.25 = 0.125v, is the voltage required to provide 0.5amps to a wire with a resistance of 0.025R and heat it 20C (68F) from 0C (32F). The Nichrome we use here at Union City Filament is an austenitic alloy that has the highest nickel content. About Nichrome Alloys Patented in 1905, Nichrome is the oldest air-stable resistance-heating alloy (that is documented). 3" of 22AWG Nichrome, requires approx 0.5 amps to increase its temperature by 20C (68F).The resistance through the wire is ~0.025R, and increase in R due to heating up to 20C very small - assuming zero. where ρ is called the resistivity of the material, R is the resistance, l is the length and A represents a cross-sectional area. Kanthal wire can operate up to 1400° (2550°) safely, while Nichrome wire has a melting temperature around 1150° (2100°). ΔT : Change of temperature ρ 0 : Original resistivity For example, at 20 °C (293 K), the resistivity of Copper at 20 °C is 1.68 * 10 -8 , it's temperature coefficient is 0.0039 K -1 , its resistivity at 30 °C is 1.75E-8. Resistance: The more heat the wire generates, the more resistance … Normally, with increase in temperature, resistance increases, thus a heating element as a wire, has a resistance of 1 ohms at RT (20oC or 68oF) may attain resistance up to 1.08 ohms at 650oC or 1202oF, hence 8% increase in resistance because of heating. Nichrome wire also has good ductility after use and excellent weldability. Normal metal wire, including nichrome, increases in resistance with increases in temperature - this makes the use of it self limiting - apply a voltage - get a surge of current, the wire heats up, the current drops as the resistance rises to a balanced situation (if the wire doesn't burn up) It has a high melting point and fantastic resistance to high temperature oxidation. Following diagram It is ideally suited as a resistance wire heating alloy, with lower resistance than that of Nichrome 80 due to it's slightly higher nickel content. The unit of resistivity is then ohm-meters (Ωm). is any of various alloys of nickel, chromium, and often iron (and possibly other elements).Some common uses are as resistance wire, heating elements in things like toasters and space heaters, in some dental restorations (fillings) and in … temperature resistance. Nichrome 90 is an alloy consisting of 90% Nickel, and 10% Chromium. There are two grades of nichrome wire which have maximum operating temperatures of about 2000 and somewhat higher. Nichrome (NiCr, nickel-chromium, chromium-nickel, etc.) to flow of electrons, such as ordinary copper wi re used in household wiring, nichrome heater wire used in toasters and ovens, and many other useful materials. Nichrome wire is made of a non-magnetic alloy composed primarily of nickel, chromium, and iron. This high-resistance material is typically used in applications that […]